Kirjeldus
SPRSUN ground source heat pumps are designed for domestic/commercial hot water and house heating. They have the following important features:
- Absorb heat from soil underground
- Installed in basement or any place you want
- Not affected by outdoor air temperature
- Two functions: hot water & house heating (heating/cooling available in other models)
- Working mode can be changed freely
- Automatic multiple protection and breakdown self check function
- Closed Loop System;
- Source Side Temp: -10℃ to 35℃
- Setting range: heating 25℃~55℃; cooling 30℃~10℃
- Circulating water pump controlling
- Linkage ON/OFF function by external controlling system signal
- Electric heater back up
- Timer function.
- Rated working condition:
Cooling: source side inlet/outlet water temp – 30℃/35℃Load side inlet/outlet water temp: 12℃/7℃;Heating: source side inlet/outlet water temp: 15℃/10℃Load side inlet/outlet water temp: 40℃/45℃ – CGS-9(HC); CGS-12(HC); CGS-18(HC); CGS-22(HC)Load side inlet/outlet water temp: 15℃/55℃ – CGS-9; CGS-12; CGS-18; CGS-22
Our heat pumps use high quality components, such as Copeland scroll compressor, Danfoss Electronic expansion valve and Eaton AC contactor and thermal relay, etc.
It is easy to install Sprsun ground source heat pump as shown by the following diagram:
We care every detail on what you need!
- Super Low Noise: Fitted cut clothes for compressor and strong pads to avoid vibration
- Anti-corrosion: Aluminum edging
- Exellent Welding Guarantee No Leakage: Four-way valve welding protection
- Energy Saving: 30mm thickness for insulation to prevent energy lost
- User-friendly Design: Ram design using machine wire
- Reliability of the Connection: Adopt automatic stamping machine from Taiwan
Related models are as below:
Arvustused
Tooteülevaateid veel ei ole.